Search found 358 matches
- Tue Feb 21, 2023 11:27 am
- Forum: Build Diaries
- Topic: It lives
- Replies: 316
- Views: 650144
Re: It lives
Hey RGV How much are you going to spray (hp)? Are you going to start spraying as you enter the measured mile? I've been thinking of some gas on my new bike, next year. Be careful with that battery. I understand that they need a different charging rate than a lead acid. I had one in a street bike and...
- Tue Dec 07, 2021 7:25 pm
- Forum: Chassis, Suspension and Saftey
- Topic: Motorcycle Lowering
- Replies: 5
- Views: 27851
Re: Motorcycle Lowering
Ludicrous
Read the book VERY carefully.
The rule of thumb is--- If you can see it you cannot change it. Remember it should be as it came off the production line.
Adjustable links are easily seen, so do not change it.
Bones
Read the book VERY carefully.
The rule of thumb is--- If you can see it you cannot change it. Remember it should be as it came off the production line.
Adjustable links are easily seen, so do not change it.
Bones
- Sat Jul 31, 2021 10:40 pm
- Forum: WANTED
- Topic: Bike: Roller or Racer
- Replies: 2
- Views: 15804
Re: Bike: Roller or Racer
Hey Jimmy " I'm looking for a bike to race" That covers a lot of ground. Best get the rule book (download) and have a look at the classes and records. Some classes are open ( no record set) some are doable and some are hard. Modified class is your best bet. You can ride a street bike with ...
- Sat Jul 31, 2021 10:19 pm
- Forum: Build Diaries
- Topic: APS/G 250
- Replies: 301
- Views: 1271665
Re: APS/G 250
Hey Pete
Good to see you found an error. The tuned length should stay the same with single or multiple cone diffuser.
You can design and print the cones to bend in MOTA. Set the desired angle and number of pieces and press go.
cheers Bones
Good to see you found an error. The tuned length should stay the same with single or multiple cone diffuser.
You can design and print the cones to bend in MOTA. Set the desired angle and number of pieces and press go.
cheers Bones
- Sun Jul 25, 2021 9:03 pm
- Forum: Build Diaries
- Topic: APS/G 250
- Replies: 301
- Views: 1271665
Re: APS/G 250
Hey Pete Have you thought about using a single diffuser cone? Isn't the theory the single cone will give you a stronger returning wave at the expense of a narrower power band so hopefully more HP? If the RPM drop at each gear change is not too much it should work. I recently finished a set of pipes ...
- Sun Jul 25, 2021 8:46 pm
- Forum: Build Diaries
- Topic: FEET FORWARD AG1350
- Replies: 73
- Views: 520437
Re: FEET FORWARD AG1350
Verry cool Harky. Now for some bodywork
Bones
Bones
- Mon Jul 05, 2021 9:56 pm
- Forum: General Information
- Topic: PLEASE HELP ME WITH BIKE CLASSIFICATION
- Replies: 7
- Views: 53886
Re: PLEASE HELP ME WITH BIKE CLASSIFICATION
Hey Jamie
Good to have another TZ out at the lake.
I don't want to jinx you, but the 250 A records are very dooable.
Just remember to start RICH. It is wide open for a LONG time
The V twin will go well. I keep thinking about making a chassis for my A model.
cheers Bones
Good to have another TZ out at the lake.
I don't want to jinx you, but the 250 A records are very dooable.
Just remember to start RICH. It is wide open for a LONG time
The V twin will go well. I keep thinking about making a chassis for my A model.
cheers Bones
- Mon Jul 05, 2021 9:48 pm
- Forum: FOR SALE
- Topic: Rolling A bike
- Replies: 4
- Views: 30416
Re: Rolling A bike
Tony. What's going on?
Bones
Bones
- Sat May 22, 2021 10:39 pm
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2075349
Re: Shaguar
Hey Gaz Have you thought of using a mechanical fuel pump for the injection? The volume of fuel needed will be huge. The mechanical pump flow will increase as the engine revs increase and the demand increases. The electric pumps do the opposite. This works very successfully with a mates turbo bike I'...
- Tue Feb 09, 2021 10:04 pm
- Forum: Build Diaries
- Topic: FEET FORWARD AG1350
- Replies: 73
- Views: 520437
Re: FEET FORWARD AG1350
Oh, now I see. that's much better. What kingpin angle are you going to use? With the LCR type sidecar chassis we used down to 5* for the steering hub. Steering was light enough and sometimes a bit twitchy. With 10* (maybe) the steering was heavy but stable. This was with an 8" tire See you at t...
- Mon Feb 08, 2021 9:38 pm
- Forum: Build Diaries
- Topic: FEET FORWARD AG1350
- Replies: 73
- Views: 520437
Re: FEET FORWARD AG1350
Harky This is looking a bit queer---- hammock like--- but very interesting. :D For some constructive criticism. What is it like if you put some weight between the rider and front suspension? Is it a bit springy? Are you going to bring a bike to SW? I've been trying to do Russell's thing with the alu...
- Thu Aug 20, 2020 10:29 pm
- Forum: Build Diaries
- Topic: Honda MG & MF 750
- Replies: 348
- Views: 465037
Re: Honda MG & MF 750
Johno,
If some of the frame has holes from rust, what is the rest of it like?
My experience with rust is you have to cut a a bunch to find good material.
cheers Bones
If some of the frame has holes from rust, what is the rest of it like?
My experience with rust is you have to cut a a bunch to find good material.
cheers Bones
- Mon Jan 06, 2020 10:57 pm
- Forum: Build Diaries
- Topic: theTRUTH
- Replies: 426
- Views: 3196936
Re: theTRUTH
Hey Russell
Your panel forming is F'n fantastic.
I'll be up for lessons after SW. I need to learn this skill.
I don't know if I'll make it for a visit before SW
cheers Bones
Your panel forming is F'n fantastic.
I'll be up for lessons after SW. I need to learn this skill.
I don't know if I'll make it for a visit before SW
cheers Bones
- Wed Nov 20, 2019 10:54 am
- Forum: Build Diaries
- Topic: theTRUTH
- Replies: 426
- Views: 3196936
Re: theTRUTH
Russell
You are excelling yourself with the aluminium forming.
I have a job for you if you like and a ride
I'm back in Oz, Ill call soon
Bones
You are excelling yourself with the aluminium forming.
I have a job for you if you like and a ride
![Smile :)](./images/smilies/icon_smile.gif)
I'm back in Oz, Ill call soon
Bones
- Thu Jan 03, 2019 10:26 pm
- Forum: Australian Event News
- Topic: Looking for motorcycle riders near me
- Replies: 4
- Views: 20657
Re: Looking for motorcycle riders near me
Hey Ant
I'm the NSW bike tech.
I'm happy to come and have a look and advise.
Call 0411677667
cheers Bones
I'm the NSW bike tech.
I'm happy to come and have a look and advise.
Call 0411677667
cheers Bones