Search found 1040 matches
- Tue Apr 29, 2014 6:30 pm
- Forum: Build Diaries
- Topic: Toyota Soarer/Lexus SC400 E/Pro
- Replies: 111
- Views: 209934
Re: Toyota Soarer/Lexus SC400
After a long sabbatical I've started spending on Soarer again this week. Namely a set of throttle bodies from a Nissan RB26. I still need a 4th pair so if anyone knows of one or a cheap set of three please do let me know. Now that I have these I can buy a lump of aluminium plate and start to whittle...
- Tue Apr 29, 2014 1:09 pm
- Forum: General Information
- Topic: Missing chain
- Replies: 4
- Views: 8695
Re: Missing chain
Did this turn up yet Greg?
- Tue Apr 29, 2014 1:05 pm
- Forum: General Information
- Topic: New Guy questions
- Replies: 22
- Views: 30715
Re: New Guy questions
If you want a longer wheelbase (2850mm VS 2690mm) go to the LS400 rather than the SC400/Soarer. They have a lower CD (0.27 LS vs 0.32 SC) but more frontal area however the CDA equates to the same for both cars. Had I known that I may not have opted for the Soarer but one came up at the right price a...
- Sat Apr 05, 2014 10:04 am
- Forum: Engine Development and Performance
- Topic: Compound Supercharged Turbocharged 125cc
- Replies: 55
- Views: 98281
Re: Compound Supercharged Turbocharged 125cc
I think the Jag would need a considerably larger magnet!!!
- Thu Apr 03, 2014 8:44 pm
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
Chris, The injectors were definitely an issue. Once cleaned it ran fine, without cleaning it would not start. We proved that by making a squirt bottle and giving it a splash. It would start and run fine on the prime. Once the injectors were cleaned it started on the key and ran again. First sign of ...
- Thu Apr 03, 2014 4:45 pm
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
But.. the engine still runs on 8 cylinders The two symptoms that got us this far are hard to crank with the plugs out (we still believe salt in the starter at this stage) and a 2/3 drop in oil pressure. oh and engine not "on song" which we had previously thought to be injectors/methanol re...
- Thu Apr 03, 2014 3:16 pm
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
Greg, The followers are solids and the rollers appeared to be fine at first inspection other than the one with the bent link. I say first inspection because they were only removed and stored, not cleaned yet. The rollers did seem to spin freely and the mating surfaces looked fine other than the one ...
- Thu Apr 03, 2014 2:44 pm
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
From the Americas comes the question.. if it had 0.022 clearance and we lost the lobe but the rest of the valve train is fine, why do we now have something approaching 0.500 ? That would require a good deal of material to leave the back of the cam? It is a good question and is currently doing my hea...
- Thu Apr 03, 2014 8:27 am
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
Chris,
Would that not also show on the faces of the rollers?
Cheers,
Rob
Would that not also show on the faces of the rollers?
Cheers,
Rob
- Thu Apr 03, 2014 8:26 am
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
We don't know yet Greg, We stopped after we had pulled the lifters and the cam is still in the engine and will pull the engine/trans in the next session. Per the video there were clearance issues on any number of valves, not just the one with the bent link which is on the opposite bank to those vide...
- Wed Apr 02, 2014 10:20 pm
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
Grumm,
The cam is (was) a Crow Cams steel billet. Other than the bent link on one pair and scarfing of that lifter roller on one edge, at first inspection the rest of the rollers and their bearings in the lifters appear fine.
Time will tell.
Rob
The cam is (was) a Crow Cams steel billet. Other than the bent link on one pair and scarfing of that lifter roller on one edge, at first inspection the rest of the rollers and their bearings in the lifters appear fine.
Time will tell.
Rob
- Sat Mar 29, 2014 10:48 pm
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
Now that it's become apparent the cam has lost a lot of lobe, it's off with the inlet, revealing another issue. http://i661.photobucket.com/albums/uu331/Dwizdofoz/Shaguar/JagEngineWoes007_zps0a15b5e5.jpg Close up http://i661.photobucket.com/albums/uu331/Dwizdofoz/Shaguar/JagEngineWoes006_zps6351137c...
- Sat Mar 29, 2014 10:45 pm
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
Part of the plan too was to check the valve clearances and this is where it all went horribly wrong. Nothing discernible in this image however the video tells the tale. http://i661.photobucket.com/albums/uu331/Dwizdofoz/Shaguar/JagEngineWoes003_zps99bd6f5c.jpg This is the eye watering part. All we h...
- Sat Mar 29, 2014 10:42 pm
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
As Gary said, I went over today with the intention of sorting the whys as to the low oil pressure and to have a look the on board video/data logs. After having a quick discussion it was out with the grill, off with the bonnet and a hair cut for the engine. With the blower off we can get the the oil ...
- Tue Mar 18, 2014 7:57 pm
- Forum: Build Diaries
- Topic: Shaguar
- Replies: 688
- Views: 2497563
Re: Shaguar
Given our "conversation" yesterday, I think this is priceless Gaz