Search found 282 matches
- Sun Apr 29, 2012 9:52 am
- Forum: Engine Development and Performance
- Topic: oil mods
- Replies: 7
- Views: 18161
Re: oil mods
Thanks Ross, yes a very big help ...you have confirmed what i suspected about the oil return problem ....by the way its an rx1000 so I would be interested in hearing about your other massive mods :) I have already done the oil mods for # 3 big end. the water jacket mod is a new one :shock: oil cooli...
- Sat Apr 28, 2012 5:48 pm
- Forum: Build Diaries
- Topic: Mr Whippy 0 Vs corrosion 10
- Replies: 24
- Views: 39839
Re: Mr Whippy 0 Vs corrosion 10
Hey Grumm, Powder coating is used for a lot more than furniture :) hearing what you say but I have no problems with powder coating. The frame will be sand blasted, degreased, then etched with zinc chromate and undercoated with a high bake zinc epoxy and then powdercoated, which is about as tough and...
- Sat Apr 28, 2012 5:29 pm
- Forum: Engine Development and Performance
- Topic: oil mods
- Replies: 7
- Views: 18161
oil mods
Due to some problems encounted at wot & high rpm im planning on doing some mods and need help in deciding what and how to do them. First the problems at around a 1/4 mile beforre the 3 mile marker I loose oil pressure typically im at wot and over 8k rpm in top gear, I set up a warning light to a...
- Thu Apr 26, 2012 6:16 pm
- Forum: Build Diaries
- Topic: Mr Whippy 0 Vs corrosion 10
- Replies: 24
- Views: 39839
Re: Mr Whippy 0 Vs corrosion 10
Ok I have made all the modifications I need to the frame now :) ....... I have decided to go this way for what I hope will be a salt proof (or as much as is possible) solution ....The frame and all the steel parts are to be powdercoated ,some ppl dont like to powder coat the frame as it could hide a...
- Wed Apr 25, 2012 7:40 pm
- Forum: Build Diaries
- Topic: Supercharged CBR250 build
- Replies: 333
- Views: 414798
Re: Supercharged CBR250 build
its always something Tiny but you have it by the balls mate I enjoy your build diary's always interesting and entertaining. When you live up near the snow line and run alchy its always a hard start. Hope you get the chance to run it on the big white dyno soon
- Mon Apr 16, 2012 8:18 am
- Forum: Engine Development and Performance
- Topic: Gearing on zx 1200r
- Replies: 24
- Views: 38052
Re: Gearing on zx 1200r
yes Greg only 10 years out hahaha must be oldtimers hey ?
- Mon Apr 16, 2012 8:16 am
- Forum: General Information
- Topic: New to forum
- Replies: 10
- Views: 11225
Re: New to forum
hello Rick,
Welcome to the forum Im also a canberra lad .....Are you building or plan on racing anything? ....Good luck with bonneville
cheers
Gary #282
Welcome to the forum Im also a canberra lad .....Are you building or plan on racing anything? ....Good luck with bonneville
cheers
Gary #282
- Sun Apr 15, 2012 11:59 am
- Forum: Engine Development and Performance
- Topic: Gearing on zx 1200r
- Replies: 24
- Views: 38052
Re: Gearing on zx 1200r
Paul when I ran nitrous on the BUSA back in 94 /95 I tried it with both pulsed & non pulesd ...in 94 I ran a 2.5 lb bottle with a range of shots from 40 to 100 non pulsed it comes on very hard that way but is a hoot rooster tail of salt and mucho tyre spin..... with a40 I did not increase my top...
- Sun Apr 08, 2012 5:07 pm
- Forum: Build Diaries
- Topic: Mr Whippy 0 Vs corrosion 10
- Replies: 24
- Views: 39839
Mr Whippy 0 Vs corrosion 10
Hello all ... the prodical son has returned ..... after many months OS and speed week rapidly approaching I checked out the DLRA site ..... lake flooded :( extend my stay for a couple of months more..........then later check again WTF all good racing is a goer :) ..... frantically change flight date...
- Sat Apr 07, 2012 5:20 pm
- Forum: General Information
- Topic: Lake Inspections 2012
- Replies: 116
- Views: 145528
Re: Lake Inspections 2012
Thanks micheal and plucka good to see the lake reverting back to normal ....one question was the new salt soft ?
Gary #282
Gary #282
- Sun Apr 01, 2012 12:21 pm
- Forum: Chassis, Suspension and Saftey
- Topic: lsd diff info
- Replies: 8
- Views: 11883
Re: lsd diff info
yes bones a streamliner of the 4 wheel type if I ever get the $$$ purely at the planning stage at least thats cheap hahahaBONES wrote:Hawk
what's going on. sounds like 4 wheels
Bones
cheers
gary #282
- Fri Mar 30, 2012 3:47 pm
- Forum: Chassis, Suspension and Saftey
- Topic: lsd diff info
- Replies: 8
- Views: 11883
Re: lsd diff info
ok folks found what I needed in NZ
- Fri Mar 30, 2012 3:06 pm
- Forum: Chassis, Suspension and Saftey
- Topic: lsd diff info
- Replies: 8
- Views: 11883
Re: lsd diff info
ok... very few oems came with LSD and im unlikely to find any wreckers out there with any of them so im left with the choice of a quaife $$$$$ or using a 4X4 ? a little more info .....need to convert to a chain drive in place of the crown wheel for an MC engine blown fuel busa ... im savy with bike ...
- Thu Mar 29, 2012 9:40 am
- Forum: Chassis, Suspension and Saftey
- Topic: lsd diff info
- Replies: 8
- Views: 11883
lsd diff info
G'day... hello race fans im back ....picking the brains of the wise ...... FWD LSD and cv's happy to live wity 700+ pony's preferably form a wrecker ie. cheap as hahah any such beast exist ???
YGTBJWTPOS Racing
\Gary #282
YGTBJWTPOS Racing
\Gary #282
- Fri Mar 09, 2012 1:35 pm
- Forum: Australian Event News
- Topic: Lake condition and forecast
- Replies: 209
- Views: 340851
Re: Lake condition and forecast
great news having spent the last 3 months in SE Asia im trying my best to be there for racing see you all there I hope