Who`s ready,?.
Moderator: DLRA
Who`s ready,?.
Quiet on here isn`it, guess everyone is busy in the shed, only, six, seven weeks (depends where you live) to Speedweek 2011,,, hope that cyclone sliding down the west coast, heads for the Antartic ,,,,
So who is ready to go ,,,
So who is ready to go ,,,
First Australian to ride a motorcycle over 200mph at Bonneville,,,
-
- Posts: 78
- Joined: Fri Jan 15, 2010 10:23 am
- Location: Mornington Peninsula Victoria
Re: Who`s ready,?.
I think I'm heading in the right direction....
I nearly had a psychic girlfriend but she left me before we met.
- Last Minute Racing
- Posts: 118
- Joined: Sun Mar 04, 2007 1:20 pm
- Location: Adelaide Hills DLRA#928
Re: Who`s ready,?.
Still gathering parts (spending money) but getting close.
Thanx
Dave
Thanx
Dave
FASTER! FASTER! BANG F&^*K! F%&*K! F#$%K! s*** MORE MONEY
- AuotonomousRX
- Posts: 729
- Joined: Wed Jan 06, 2010 10:05 pm
- Location: Eyre Peninsula SA
Re: Who`s ready,?.
Hey Dave
I have got the RGV ready again, just got to do a tidy up and a lick of paint. I was hoping to run APS but had to change plans a week ago. I will run MG 250 again.
Next job is to keep the dust out of the trailer, got a shock last year more dust inside the trailer than on the outside .
Traps for new players. Ha Ha!!!
See you there
Pete 866
(aka SaltPeter)
I have got the RGV ready again, just got to do a tidy up and a lick of paint. I was hoping to run APS but had to change plans a week ago. I will run MG 250 again.
Next job is to keep the dust out of the trailer, got a shock last year more dust inside the trailer than on the outside .
Traps for new players. Ha Ha!!!
See you there
Pete 866
(aka SaltPeter)
Still trying to decide if I am a procrastinator
Pete
DLRA #866
Pete
DLRA #866
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re: Who`s ready,?.
Who's ready,?.
Not quite ...... No streamliner this year
But have entered these parts into M/F 1350
As not to panic myself with how many days are left, converting it into hours makes plenty of time
about....... one thousand two hundred and fifty......
Not quite ...... No streamliner this year
But have entered these parts into M/F 1350
As not to panic myself with how many days are left, converting it into hours makes plenty of time
about....... one thousand two hundred and fifty......
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
-
- Posts: 68
- Joined: Sun May 07, 2006 12:28 am
- Location: brisbane
Re: Who`s ready,?.
Yeah I'm getting very close, the new bike I'm building just needs to be sprayed and tune up and I'm good as done. Then it off to the drags for a test and tune session
#680 *TEAM KRAZY*
Live Life In The Fast Lane.
2010 MPS/G 650 144.057 mph
Live Life In The Fast Lane.
2010 MPS/G 650 144.057 mph
-
- Posts: 1315
- Joined: Tue Jul 05, 2005 11:23 pm
- Location: Right behind you Chief !
Re: Who`s ready,?.
At this point I'm prettysure I remember how the car goes together, other than that there is a motor somewhere, that someone else is pretty sure they know how to assemble......
That's all I can say right now.....
That's all I can say right now.....
...few understand what I'm trying to do , but they vastly outnumber those who understand why..
Re: Who`s ready,?.
Im ready...
then again, im not racing. Just there to spectate for my first time.
Hopefully We'll have something to enter next year, even if its just the street class.
Meet you on the salt.
-Shaun
then again, im not racing. Just there to spectate for my first time.
Hopefully We'll have something to enter next year, even if its just the street class.
Meet you on the salt.
-Shaun
Re: Who`s ready,?.
Hi, Shaun, there is no street class. Nearest thing will be Production class. Check out the rule book to see what is required re roll cage, safety equipment etc. It is a sure thing that if you go once, you will be bitten by the dreaded "salt bug". Cheers, Pete. DLRA #6
- Last Minute Racing
- Posts: 118
- Joined: Sun Mar 04, 2007 1:20 pm
- Location: Adelaide Hills DLRA#928
Re: Who`s ready,?.
Hey Peter
yep im ready except for not having any barrels yet, bought a set from England that were advertised as "as new" as new 25 years ago maybe, so back they went. Then a set from Sydney that "would suite new buyer" one was the other had a big chip out of the nicosil on the exhaust bridge, so yep back they went. Next move is to buy a set of good second hand ones locally and send them to NZ for replating. Luckily the NZ $ is worth around $0.25 Aust atm. well almost.
When i get a good set of barrels ill pull the motor to bits, give it a clean and put it all back together. Great thing about 2 smokers is that thats probably a weekends work lol.
CYA there
Thanx
Dave
yep im ready except for not having any barrels yet, bought a set from England that were advertised as "as new" as new 25 years ago maybe, so back they went. Then a set from Sydney that "would suite new buyer" one was the other had a big chip out of the nicosil on the exhaust bridge, so yep back they went. Next move is to buy a set of good second hand ones locally and send them to NZ for replating. Luckily the NZ $ is worth around $0.25 Aust atm. well almost.
When i get a good set of barrels ill pull the motor to bits, give it a clean and put it all back together. Great thing about 2 smokers is that thats probably a weekends work lol.
CYA there
Thanx
Dave
FASTER! FASTER! BANG F&^*K! F%&*K! F#$%K! s*** MORE MONEY
Re: Who`s ready,?.
Whats that frame Brownie , its got me tricked, the frount engine mounts look J`ish, but that braceing between the rear top an bottem mounts ,,, Dave, its to late now, but i get my Nicosiling work done in the States, cheap as, these Aussie bastards are ripping us off ,,, Spent a day on the dyno a cuppla weeks ago, refining the fuel map, picked up seven horsepower, was happy with that "for now",, the 12 sits awaiting a good flogging ,,, BEN , comeon mate, theres no hiding, fessup ,,,,,
First Australian to ride a motorcycle over 200mph at Bonneville,,,
Re: Who`s ready,?.
Ah, where was I reading that there was then?...OLDtimer wrote:Hi, Shaun, there is no street class. Nearest thing will be Production class. Check out the rule book to see what is required re roll cage, safety equipment etc. It is a sure thing that if you go once, you will be bitten by the dreaded "salt bug". Cheers, Pete. DLRA #6
*looks it up*
Section 6.4.7 Street: Limited to 125MPH.
Page 38 of the online section. Although I know you are moving to the SCTA rulebook.
Re: Who`s ready,?.
I've just removed the link to the online rulebook.
It's now out of date and we don't want people using it.
We do have hard copies of the 2011 SCTA rulebook, which is much closer to the mark.
I think these are available from the DLRA, $10 each, give Carol a call.
PO Box 349
Castlemaine VIC 3450
Ph:03 5472 4629
It's now out of date and we don't want people using it.
We do have hard copies of the 2011 SCTA rulebook, which is much closer to the mark.
I think these are available from the DLRA, $10 each, give Carol a call.
PO Box 349
Castlemaine VIC 3450
Ph:03 5472 4629
Keep the shiney side up........
DLRA WebMaster / Editor
DLRA WebMaster / Editor
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re: Who`s ready,?.
Stayt`ie
That chassis is a 1983 GPzx 1100 The first of the unitrack rear ends .....
Will put the rest of it up in the build diaries .
Ross.
That chassis is a 1983 GPzx 1100 The first of the unitrack rear ends .....
Will put the rest of it up in the build diaries .
Ross.
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
Re: Who`s ready,?.
thats a zx1100 frame ronnie aka as gpz1100 unitrak mono shock. unsure of my plans yet but i do have the time off work booked & a 1428 monster sitting in the garage doing nothing.
regards ben
regards ben
ben james dlra#389
moriwaki monster.
moriwaki monster.