Phase out of leaded fuel by September 2019.

Other News, Views and topics.

Moderators: DLRA, outbacktrev, Peter Noy, Rob Carroll, OLDtimer

sunocoracingaus
Posts: 3
Joined: Sun Dec 23, 2018 11:44 am

Re: Phase out of leaded fuel by September 2019.

Post by sunocoracingaus » Fri Apr 12, 2019 11:48 pm

Hi All,

Aaron from Sunoco Racing/VPW here again.

We have released the specs on our new unleaded fuel this week. It is currently being loaded onto a ship & being shipped to Aus, as we speak.
Sunoco Racing EVO 10 is coming & is ready to be unleashed on Australian Race Tracks!

Designed from the ground up and blended in Sunoco Racing’s own Marcus Hook facility under the guidance of the biggest names in Australian, USA and European Naturally Aspirated Drag Racing .

With its Motor Octane of 100 and 10% Oxygen by weight, Sunoco EVO 10 Unleaded is the Highest Octane and Highest Oxygenated Unleaded on the market today.

This fuel has been independently tested by leading NHRA’s Pro Stock, Super Stock & Comp Eliminator Engine builders and tuners. Sunoco EVO 10 Unleaded has proven to match and exceed existing leaded fuels performance with only minor/at track tuning adjustments.

Sunoco EVO 10 has been designed & tested in a wide range of engines, from 16:1 Naturally Aspirated to lower compression forced induction combinations. And because Sunoco EVO 10 doesn’t contain any MTBE or ETBE, it is safer on your fuel system & can also be used in marine applications.

Motorcycle riders have not missed out either. The high burn speed will work extremely well with small capacity high revving engines allowing maximum power without significant timing changes.

Sunoco EVO 10 Unleaded is on the water will be in Australia shortly, so stay tuned to www.vpw.com.au, www.sunoco.com.au, https://www.facebook.com/SunocoAustralia/ or Instagram/sunocoracingfuelsau for pricing & information on where to get your hands on some.
Image

mal hewett
Posts: 39
Joined: Mon Feb 27, 2006 2:52 pm
Location: roxby downs

Re: Phase out of leaded fuel by September 2019.

Post by mal hewett » Sat Apr 13, 2019 11:02 am

Is the 10% oxygen by weight legal in the Gas class? regards Mal
Mal Hewett
#234

sunocoracingaus
Posts: 3
Joined: Sun Dec 23, 2018 11:44 am

Re: Phase out of leaded fuel by September 2019.

Post by sunocoracingaus » Tue Apr 16, 2019 8:51 pm

mal hewett wrote:
Sat Apr 13, 2019 11:02 am
Is the 10% oxygen by weight legal in the Gas class? regards Mal
Hi Mal,

I have to familiarise myself a bit more with the DLRA rules, so I will go through them.

The issue we have with unleaded fuels is, the is a physical octane limit you hit with unleaded fuels & the current additive technology that is both available & affordable. So us & other manufacturers will use the oxygen content & other additives to make up for that octane wall you hit.

User avatar
DLRA
Site Admin
Posts: 1444
Joined: Thu Feb 27, 2003 11:03 am
Location: Australia
Contact:

Re: Phase out of leaded fuel by September 2019.

Post by DLRA » Wed Apr 17, 2019 3:54 pm

G'Day Aaron,
Below is the wording from the DLRA Rulebook. (Basically the same as SCTA rules, just a different machine for testing).

When we get asked by entrants what petrol to use or buy for GAS classes, the easiest (for them and us) answer to give is, buy what ever you can get from your local service station. However we do have a lot of entrants that buy their petrol from other suppliers.

NOTE: We do not actually refer to octane rating or RON or MON in the rules because they can vary so much from supplier to supplier and can also depend on how fresh the petrol is. Rather we use a meter to compare the DC value of the petrol with a known standard and then apply an upper limit of what GAS class petrol should read. This works for both leaded petrol which has a lower reading than unleaded, but does not mean that it is of any higher performance.

The problem is most manufacturers / suppliers do not state the DC value of their fuels. So if entrants are using a petrol of unknown DC value, they need to supply a sample to the club for testing so that they can then can be sure. So far as I know there has only been one team do this.

It should also be noted: We are not testing to see what type of fuel it is, this can only be done in a laboratory, rather we are testing if it can be used in GAS class or FUEL class.

The way that the testing works, if a sample is tested and it is higher than 15 it will contain some sort of additive / blend or be a high performance (racing) fuel and is not permitted for use in GAS class. For example Methanol has a DC value of 32.

GASOLINE CLASSES:
The DLRA defines gasoline to contain no nitrogen bearing compounds, no propylene oxide, no ethylene oxide, and no more than 10% methanol. The contest board may choose any test or combination of tests to assure that liquid fuels used in GASOLINE classes comply with these specifications. The tests may include but will not be limited to testing for the dielectric constant (D.C.) value, color comparisons,specific gravity, gas chromatography, mass spectrometry, and/or other testing methods. The addition of compounds containing oxygen, such as ethanol, methanol and other oxygenates may produce a mixture with a D.C. greater than 15.0 as measured with a Digitron DT-64 “DC Meter” zeroed on reagent grade, pure CYCLOHEXANE. 15.0 is the current DLRA acceptable dielectric ceiling. Most gasoline will check under this ceiling. At a non-“EVENT” gasoline meet, any gasoline that measures 15.0 or less on the D.C.scale and meets all other DLRA requirements will be allowed.

All liquid gasoline blends can be tested and certified to have a specific D.C., color, specific gravity, and other chemical properties. All gasoline that is tested and meets the DLRA definition of gasoline may be allowed on a case by case basis by the Contest Board. It is recommended that unknown gas be submitted to the DLRA and checked before use in competition.
E85 is not allowed in gas classes.
Keep the shiney side up........
DLRA WebMaster / Editor

600dlra
Posts: 7
Joined: Tue Mar 17, 2015 9:21 pm

Re: Phase out of leaded fuel by September 2019.

Post by 600dlra » Mon Apr 29, 2019 11:39 pm

Any idea when we will have an answer on what fuel is permitted to be used in the gas class?
Telling us that buying it from the servo doesn't help much.With leaded fuel c14+ was legal,nobody gets that at the servo.
THanks,Ian

User avatar
DLRA
Site Admin
Posts: 1444
Joined: Thu Feb 27, 2003 11:03 am
Location: Australia
Contact:

Re: Phase out of leaded fuel by September 2019.

Post by DLRA » Sun May 05, 2019 6:15 pm

If you are running GAS class and you think you know what petrol you want to run, I would strongly suggest getting a sample of it that we can test with the Digitron, that is the only way you are really going to know.
We can bring the Digitron to the General Meetings and conduct tests there or make some other arrangement.
Failing that, contact your fuel supplier and ask them for a DC reading for the petrol you want to buy.
Keep the shiney side up........
DLRA WebMaster / Editor

Post Reply