Lexpute

See cars and bikes being built for the salt

Moderator: DLRA

momec
Posts: 667
Joined: Sun Sep 11, 2005 8:15 pm

Lexpute

Post by momec »

Well Bobs guessed it.

The old ute motor is sold and l am not alone when l say l will miss the sound.

Turbo motors sound like crap and its after much deliberation and soul searching I've discovered the need for speed and more so the need for a more technical challenge has overcome the aural satisfaction of an atmo V8.

The XP ute now has a 1UZFE Toyota V8 sitting dummied in the engine bay.
The plan is finance and consumation of the old motor sale permitting, to refresh the Toyo engine, fit good rods and pistons, re port the heads fit a single turbo and possible paraffin intercooler, maybe ice, depends on dyno tests.
HP level I'll let you know after it leaves the dyno but want to improve the speed so l can run long course with purpose.
I've purchased a Motec M8 and will run boost control with a 9 position switch to bleed the power in gradually. If the traction is sh>t like this year that will be crucial.
l'll run a single rail 4 speed again with the option to upgrade to a toploader if required.
She already runs a 9 inch so the final ratio will be decided after dyno results on the new donk.

Being my own thread about myself please accept this once only apology for some longwinded diatribes at times, I'll try and keep it relavent and to the point.

Ok so its all happening in Chris's shed and with a little help from my friends will maybe post some photos of the progress.

Seeya Chris
Acme Racing #251
Rob
Posts: 1095
Joined: Wed Jul 06, 2005 5:30 pm
Location: Richmond, NSW. DLRA #888

Post by Rob »

G'day Chris,

And here's me thinking you'd gone all Citroen on us :D Le XP ute non?

Better get cracking, only 9 or 10 months to go and yes, pics definitely.

Cheers,
Rob
I owe, I owe, so off to work I go.
User avatar
Greg Watters
Posts: 760
Joined: Mon Sep 27, 2004 8:57 pm

Post by Greg Watters »

Be interesting to see how the paraffin intercooler stacks up against the ice
fairly sure ice will win but i have often thought about paraffin on my streetbike.

Sure be a fun project :)
Rob
Posts: 1095
Joined: Wed Jul 06, 2005 5:30 pm
Location: Richmond, NSW. DLRA #888

Post by Rob »

Just had a good read on the paraffin intercoolers. Something I'd not run across before.

Are you sure it'll be effective on a hot day Chris? Given the melting point of paraffin is 52'C and you'll be on boost for 2 minutes plus.

To quote the paraffin intercooler website I read :

Melting point: 52 degrees C
Specific heat: 3.27 kJ per kg per degree C
Specific heat of fusion: 210 kJ/kg
So to increase the temp of 1kg of the wax from 47 to 52 degrees takes 16.35kJ, but to push it past 52 degrees takes nearly 13 times as much energy. (Or, to risk causing confusion, you could dissipate in it a power of 14kW for 15 seconds to melt 1kg.)


Cheers,
Rob
I owe, I owe, so off to work I go.
hawkwind racing
Posts: 593
Joined: Sun May 04, 2003 7:59 pm
Location: Captains Flat
Contact:

Post by hawkwind racing »

Chris I wondered when someone would start using one of those post dino V8's :D ,was it one of Don's ?
stick with the ice /water intercooler for racing :wink:
good luck with the build :D
cheers
Gary
fastest busa in Captains flat pop. 200
User avatar
Lynchy
Posts: 1117
Joined: Mon Mar 07, 2005 6:12 pm
Location: Brisneyland

Post by Lynchy »

Gary

Don is a Nissan man and I think he shipped his motor over to the island with him.

Lynchy
momec
Posts: 667
Joined: Sun Sep 11, 2005 8:15 pm

Post by momec »

I planned to experiment with parrifin on the dyno and do constant state runs and time the effect on the wax.
The problem is getting the bloody stuff out of the intercooler if the experiment fails.

Maths never lies unfortunatlely so I'm quite sure it will end up water/ice because I want to build this to run LONG course and unless we give her some nasal delivery I think the pariffin will be all over to early :cry:

No not the Dons

Chris
Acme Racing #251
Rob
Posts: 1095
Joined: Wed Jul 06, 2005 5:30 pm
Location: Richmond, NSW. DLRA #888

Post by Rob »

G'day Chris,

You shouldn't have much trouble melting the paraffin out surely? Perhaps a well placed drain plug during the construction phase. A final sluice with xylene or Citrisolv should do the rest.

How do you think your overall balance will go when it's all said and done?

Cheers,
Rob
I owe, I owe, so off to work I go.
User avatar
Greg Watters
Posts: 760
Joined: Mon Sep 27, 2004 8:57 pm

Post by Greg Watters »

The size requirements would be very different for both , need lots of capacity for the paraffin but water/ice can be very compact, esp if using dry ice/metho for subzero (or near to) inlet temps
Rob
Posts: 1095
Joined: Wed Jul 06, 2005 5:30 pm
Location: Richmond, NSW. DLRA #888

Post by Rob »

Thought I'd throw in a couple of alternate 1UZ-FE use pics as teasers while we wait for Chris's.

1UZ-FE Supercharged Outlaw
Image

1UZ-FE Reynard

Image
I owe, I owe, so off to work I go.
penny
Posts: 335
Joined: Mon Feb 26, 2007 8:30 pm
Location: adelaide

supercharged outlaw

Post by penny »

come on rob stop teasing what the sauce bottle in the first photo
Rob
Posts: 1095
Joined: Wed Jul 06, 2005 5:30 pm
Location: Richmond, NSW. DLRA #888

Re: supercharged outlaw

Post by Rob »

penny wrote: what the sauce bottle in the first photo


Come on Paul, as an ex drag racer that's got to be tongue in cheek :lol:

I'd bet it's their fuel squirt bottle for the injecton hat.

Cheers,
Rob
I owe, I owe, so off to work I go.
Dr Goggles
Posts: 1315
Joined: Tue Jul 05, 2005 11:23 pm
Location: Right behind you Chief !

lurk

Post by Dr Goggles »

.......the Loring AFB meet has just been had up in Maine USA....I couldn't help but notice in this photo.......

http://www.landracing.com/forum/index.p ... 3740;image

....some crummy ol' ute!!!!!!!!!!
...few understand what I'm trying to do , but they vastly outnumber those who understand why..
momec
Posts: 667
Joined: Sun Sep 11, 2005 8:15 pm

Post by momec »

Very keen eyesight there Mr Goggles.
A very rare find in that part of the world but he obvoiusly has very good taste in race cars.

Chris 8)
Acme Racing #251
Rob
Posts: 1095
Joined: Wed Jul 06, 2005 5:30 pm
Location: Richmond, NSW. DLRA #888

Post by Rob »

That'd be a '60-3 Ranchero, lots over there. Same but different.

http://classicmotorsports.net/project-c ... -ranchero/
Image

How's yours coming Chris?

Cheers,
Rob
I owe, I owe, so off to work I go.
Post Reply