BOSS STREAMLINER S/UF 925
Moderator: DLRA
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re: Got it
Thanks heaps BONES
I put a lot of effort into getting that " Wrong "
Never thought to rotate the shaft & use a link, as setting king pin angle on my system is an absolute pain as the front of the four bars has to be removed to set the king pin angle ( a 2 hour job on a good day ) yours is about 2 minutes .
Time for me to do some revision.
Thanks again.
Grasshopper
I put a lot of effort into getting that " Wrong "
Never thought to rotate the shaft & use a link, as setting king pin angle on my system is an absolute pain as the front of the four bars has to be removed to set the king pin angle ( a 2 hour job on a good day ) yours is about 2 minutes .
Time for me to do some revision.
Thanks again.
Grasshopper
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re:Retract !
After receiving three phone calls from readers that will remain aynonomous .
I feel the need to retract my statement about being "WRONG"
First I would like to appoligize for the use of the aformentioned word on a puplic forum'
and the Willy Nilly way in which it was shameleslly used.
I do do realize that the forum has a code of conduct that needs to be addered to, and the use of such a negative word is
disgusting and will not be tolerated !
The manufactured article in question is just only "DIFFERENT"
GET BACK TO WORK.
I feel the need to retract my statement about being "WRONG"
First I would like to appoligize for the use of the aformentioned word on a puplic forum'
and the Willy Nilly way in which it was shameleslly used.
I do do realize that the forum has a code of conduct that needs to be addered to, and the use of such a negative word is
disgusting and will not be tolerated !
The manufactured article in question is just only "DIFFERENT"
GET BACK TO WORK.
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
Re: BOSS STREAMLINER S/UF 925
Have you been working with glue Ross?
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re: NEXT
LYNCHY
Working to late!
Moved onto front engine mounts for the weekend, one set is allready made ,the rest of them will be finnished and fitted by the weekends end .
Fixed the TV in the workshop so Bathhurst wont be missed.
Working to late!
Moved onto front engine mounts for the weekend, one set is allready made ,the rest of them will be finnished and fitted by the weekends end .
Fixed the TV in the workshop so Bathhurst wont be missed.
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re: BOSS STREAMLINER S/UF 925
All engine mount sets made and tacked in , 4 out of the six of them are half circle mounts & it takes a bit of patience to let a hole saw dig its way through a 6mm peice of stainless steel
Will now move onto fuel pump mounts which will sit in between the engine mounts (each engine will have its own pump)
Will now move onto fuel pump mounts which will sit in between the engine mounts (each engine will have its own pump)
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re: Daylight
Unlike me !
The liner likes it's photo taken.
Outside for a change this time...
The liner likes it's photo taken.
Outside for a change this time...
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
- gennyshovel
- Posts: 866
- Joined: Tue Mar 29, 2005 10:10 am
- Location: Broken Hill
Re: BOSS STREAMLINER S/UF 925
NOICE !
What do you do in your "spare" time Ross ?
What do you do in your "spare" time Ross ?
Tiny DLRA# 484
Postiebike Racing , created & funded by TwoBob Engineering
Postiebike Racing , created & funded by TwoBob Engineering
Re: BOSS STREAMLINER S/UF 925
I'll see your noice, and raise you a vf noice.gennyshovel wrote:NOICE !
What do you do in your "spare" time Ross ?
G
They make it
I make it work
I make it work
Re: BOSS STREAMLINER S/UF 925
Looks much better at that height Ross. It looks balanced and stable already unlike some bike liners that look a bit top heavy. The rider position also looks good now. Keep at it.
Chris
Chris
Acme Racing #251
Re: BOSS STREAMLINER S/UF 925
Looks great on the ground Ross!
Looks like something Wile E Coyote would use!
Looks like something Wile E Coyote would use!
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re: BOSS STREAMLINER S/UF 925
Sorry about no updates for a while , " Had camera issues "
Anyway..... Thanks for the thumbs up boys , it does help as sometimes these never ending jobs can be somewhat "testing"
Have got a bit done and will load up progress over the next week or so.
First: Fire control handle on the right hand side ( this one is for the cabin ) Delayed making this one, as having the bottles in the cabin became
a room issue , electrical doodackys needed more room than previously thought.
Anyway..... Thanks for the thumbs up boys , it does help as sometimes these never ending jobs can be somewhat "testing"
Have got a bit done and will load up progress over the next week or so.
First: Fire control handle on the right hand side ( this one is for the cabin ) Delayed making this one, as having the bottles in the cabin became
a room issue , electrical doodackys needed more room than previously thought.
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re: BOSS STREAMLINER S/UF 925
This is the third bottle mounted..
Its in the spare 4 inches of room between the second and third engines.
It had to lifted of the lower bar to allow the gear shit rod to pass underneath it.
In the lower part of the second picture is the fuel pump mounted for the third engine.
Above all of that is the begining of the air intake runner system.
Its in the spare 4 inches of room between the second and third engines.
It had to lifted of the lower bar to allow the gear shit rod to pass underneath it.
In the lower part of the second picture is the fuel pump mounted for the third engine.
Above all of that is the begining of the air intake runner system.
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
-
- Posts: 56
- Joined: Sun Oct 24, 2010 4:38 pm
- Location: Birkdale , South East Queensland
Re: BOSS STREAMLINER S/UF 925
Beautiful bit of work there Ross. Cheers F.G.
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re: BOSS STREAMLINER S/UF 925
These next pictures are of the shatter shied x chain guard x bulk head .. the top half of these pieces is still under construction
the hole through the front part of the shield and the frame rail is where the lifting bar will eventually go through which
will also enable it to be worked on, on the stand at the salt . the reason for this shatter shield is that the 35 litre methanol tank
will be sitting directly behind the third engine.
The bonus picture : is of the stainless steel ....Bristol 188..... Nickname "flying pencil " Reached mach 2
has a unncanny resemblance to THRUST SSC .
Cheers
..Ross
the hole through the front part of the shield and the frame rail is where the lifting bar will eventually go through which
will also enable it to be worked on, on the stand at the salt . the reason for this shatter shield is that the 35 litre methanol tank
will be sitting directly behind the third engine.
The bonus picture : is of the stainless steel ....Bristol 188..... Nickname "flying pencil " Reached mach 2
has a unncanny resemblance to THRUST SSC .
Cheers
..Ross
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
Re: BOSS STREAMLINER S/UF 925
The flying pencil looks rather sad, like the look you get when the Hostie says Brace Brace Brace, or is that just me.
Chris
Chris
Acme Racing #251