Universal chassis

See cars and bikes being built for the salt

Moderator: DLRA

Post Reply
Hoofhearted
Posts: 62
Joined: Wed Nov 25, 2009 5:55 pm
Location: Riverside, SoCal

Re: Universal chassis

Post by Hoofhearted »

grumm441 wrote:Hoof
I think you're right about Tom Evans
There aint much he doesn't pick up on
I spent Bonneville speedweek at motorcycle tech this year and learned quite a lot from him
G
I often wonder how Tom learned so much. Did he learn by doing or seeing? : - )

But I'm grateful he's there and hope he will be there for a lot longer. He keeps us honest.
Don't cry because its over. Smile because it happened.
User avatar
BONES
Posts: 371
Joined: Wed Mar 15, 2006 4:28 pm
Location: Killara Sydney

Re: Universal chassis

Post by BONES »

Here we are with this weeks installment
Image
engine plates are done and engine is mounted. Chassis mounts been set so we can fit a TZ350--hence the large engine plates.
and the sprockets line up. This engine has the reed valve in the cylinder so I turned it around and
will bring the pipe out over the back wheel. Also leaves plenty of room for an airbox for the carb.
Image
turned up a steering stem and fitted the forks.
forks are off one of those 150 thumsters, shortened to 50mm travel. Front wheel is off a gpz 250
with a 125 road race slick
Image
stay tuned
cheers Bones
momec
Posts: 667
Joined: Sun Sep 11, 2005 8:15 pm

Re: Universal chassis

Post by momec »

Obviously some new tricks left in the old dog eh Bones, :wink: Nice work.
Chris
Acme Racing #251
Hoofhearted
Posts: 62
Joined: Wed Nov 25, 2009 5:55 pm
Location: Riverside, SoCal

Re: Universal chassis

Post by Hoofhearted »

Any updates?? We lost the Oct. and Nov. El Mirage meets and are now deep in LSR withdrawl. Any info would be great.
Don't cry because its over. Smile because it happened.
User avatar
ROSS BROWN
Posts: 477
Joined: Thu Feb 18, 2010 6:43 pm
Location: COORPAROO BRISBANE

Re: Universal chassis

Post by ROSS BROWN »

Hoof
Bones is of line for the moment ... jabberd something about "dial up" :shock: when I saw him at Christmass..
But did tell me that both Alex and his bike will be at the salt.
Cheers Ross..
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.

HOW FAST CAN YOU GO ?

S/UF 925
User avatar
BONES
Posts: 371
Joined: Wed Mar 15, 2006 4:28 pm
Location: Killara Sydney

Re: Universal chassis

Post by BONES »

I'm back on line with medium fast
Alex's bike is progressing -- started it last weekend--- made some noise 1st pull of the rear wheel.
Only ran it for a short time as it has no radiator. He will get it mounted this week and we will gige it a better run on the weekend.
Sounds like a GIANT angry mozzie
Image
Image
Image
Image
Alex has done verry well with the welding and fabrication.The pipe turned out a treat. This learning curve is flattening out a little.
BUT he is on the steep part of the fiberglass curve.
The alloy rod came out of the engine. They are prone to braking. The fella who gave me the engine found 2 standard steel rods.
Had them crack tested (both good)and shotpeened one.
Just need a few more bits (bigend,piston pin, bearings...)and it's right to go together.
Image
The alloy rod will look much better in my trophy cabnet than hanging out the front of the cases
User avatar
BONES
Posts: 371
Joined: Wed Mar 15, 2006 4:28 pm
Location: Killara Sydney

Re: Universal chassis

Post by BONES »

the rods
Image
User avatar
RGV
Posts: 708
Joined: Sun Feb 06, 2011 9:17 pm
Location: Mid Murray Mallee

Re: Universal chassis

Post by RGV »

Thats going to sound sweet, no muffler?

Thanx
Dave

Last Minute Racing
DLRA #928

2010 MPS/G 250 118 MPH
2011 Washed Out
2012 Washed Out
2013 MPS/G 250 131 MPH (RECORD)
2014 MPS/G 250 140 MPH (RECORD)
2015 MPS/F 250 DNF
2016 MPS/F 250 114 MPH (RECORD)
2017 MPS/F 250 DNF
User avatar
BONES
Posts: 371
Joined: Wed Mar 15, 2006 4:28 pm
Location: Killara Sydney

Re: Universal chassis

Post by BONES »

The yammy started first pull of the back wheel. Neighbour shouted something over the fence about a giant mozzy
It will be ready for speedweek--only need to finish the seat,paint the frame, fit another tacho( $20 krober failed) tyres and valve stems and----
seat on the yamaha
Image
Image
The weslake is another story, it is a REAL TEST
second hand rocker turned up cracked
was supplied 2 new ones-- one of these doesn't fit (weslake changed bearing length as they developed the engine)
the new one is on the way.The guy in the states I've been getting parts from so good at getting bits too me.
rods are not available in standard length (4mm shorter) but a mate gave me a couple of old standard ones,crack test ok and shotpeened
bigends are not available so machine new sleve for the rod and grind the pin hole for one which is available. The bonus is the bigend is now available off the shelf .The crank should be done this weekend
If all this lot doesn't go together I am bringing a hyabussa and run it naked.
seat on the weslake
Image
Image
see you all soon
cheers Bones
grumm441
Posts: 523
Joined: Mon Nov 14, 2005 5:43 pm
Location: Buggery, a tidy town
Contact:

Re: Universal chassis

Post by grumm441 »

Hey Bones
Is that tail section more then ten inches beyond the rear edge of the rear tyre
G
They make it
I make it work
User avatar
Greg Watters
Posts: 760
Joined: Mon Sep 27, 2004 8:57 pm

Re: Universal chassis

Post by Greg Watters »

Aren't our regs for 400mm in APS
grumm441
Posts: 523
Joined: Mon Nov 14, 2005 5:43 pm
Location: Buggery, a tidy town
Contact:

Re: Universal chassis

Post by grumm441 »

Greg Watters wrote:Aren't our regs for 400mm in APS
I think that may be for 3 wheels
G
They make it
I make it work
hawkwind
Posts: 294
Joined: Fri Dec 17, 2010 3:50 pm

Re: Universal chassis

Post by hawkwind »

400mm for APS is correct :)lookin bloody good
Vehicle......................A new creation.
Designed by................Troglodyte.
Engineered/ built by......Rustic.
Financed by.................Nickles & Dimes.
Rider......................... Tardus Vetus Inflatio
grumm441
Posts: 523
Joined: Mon Nov 14, 2005 5:43 pm
Location: Buggery, a tidy town
Contact:

Re: Universal chassis

Post by grumm441 »

hawkwind wrote:400mm for APS is correct :)lookin bloody good
I'm looking at the rulebook and I'm not seeing it
G
They make it
I make it work
User avatar
ROSS BROWN
Posts: 477
Joined: Thu Feb 18, 2010 6:43 pm
Location: COORPAROO BRISBANE

Re: Universal chassis

Post by ROSS BROWN »

Got a lot done in seven months boy's 8)
And the "THRASH" is on

Bones :The top part of the fairing on the weslake looks somehow familiar.....
Don't happen to own a kyack ..... or did....
Looking good 8)
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.

HOW FAST CAN YOU GO ?

S/UF 925
Post Reply