Universal chassis
Moderator: DLRA
Re: Universal chassis
That they are, wonder if you could offset grind the crank & run a different rod to get them into the 650 class?
Jon
Jon
DLRA#1115
Underhouse Engineering
Underhouse Engineering
-
- Posts: 62
- Joined: Wed Nov 25, 2009 5:55 pm
- Location: Riverside, SoCal
Re: Universal chassis
They look like big, heavy lumps. I'm not sure the sidecar would hold it. But it is an idea. Turning it sideways for chain drive might present a problem (however minor). The 750 sidecar records at Bonneville are pathetic (and the 650 records).
Don't cry because its over. Smile because it happened.
Re: Universal chassis
As Grumm said they're a good motor, some of the better hp per cc potential in a pushrod engine being water cooled.
There is a thread on LSR forum of a CX500 turned 90 degrees.
jon
There is a thread on LSR forum of a CX500 turned 90 degrees.
jon
DLRA#1115
Underhouse Engineering
Underhouse Engineering
-
- Posts: 62
- Joined: Wed Nov 25, 2009 5:55 pm
- Location: Riverside, SoCal
Re: Universal chassis
Thats Jim's CX. I'm not sure I'd want to go to that much effort for an engine I don't believe is any better than a good Weslake.
Don't cry because its over. Smile because it happened.
-
- Posts: 62
- Joined: Wed Nov 25, 2009 5:55 pm
- Location: Riverside, SoCal
Re: Universal chassis
Bones. It was good to meet you on the salt. Sorry it wasn't longer meeting but that place tends to get a bit crazy. Did you stay for BUB? We had a great time with the "big" (546) Weslake, Ran a best of 129.475 for the mile. And a couple of records. Hope you haven't given up entirely on your Weslake.
By weslake at 2012-08-12
By weslake at 2012-08-12
Don't cry because its over. Smile because it happened.
Re: Universal chassis
Hoof, Bones is at BUB's, riding Terry Princes Vincent,, knowing Bones, he wont have anything to do with a computer until he gets home, ,,
First Australian to ride a motorcycle over 200mph at Bonneville,,,
-
- Posts: 62
- Joined: Wed Nov 25, 2009 5:55 pm
- Location: Riverside, SoCal
Re: Universal chassis
I met him at SpeedWeek. Didn't get to talk to him long enough. I guess the Weslake is dead in the water. Shame. Was hoping to spur him to re-do it.
By weslake at 2012-08-17
By weslake at 2012-08-17
Don't cry because its over. Smile because it happened.
Re: Universal chassis
JonB wrote:That they are, wonder if you could offset grind the crank & run a different rod to get them into the 650 class?
Jon
or you could just get the cx650
G
They make it
I make it work
I make it work
-
- Posts: 62
- Joined: Wed Nov 25, 2009 5:55 pm
- Location: Riverside, SoCal
Re: Universal chassis
Jim makes the CX650 fly but I don't think I'm as talented as him at building one. So I'll take a shot at building one of these.
By weslake at 2012-08-20
By weslake at 2012-08-20
Don't cry because its over. Smile because it happened.
-
- Posts: 62
- Joined: Wed Nov 25, 2009 5:55 pm
- Location: Riverside, SoCal
Re: Universal chassis
Bones, Is the Weslake dead in the water? Be a shame if it was. Or do you have plans? Here's a spur to get it back on the rails.
http://youtu.be/r5EBHbk3Ito
http://youtu.be/r5EBHbk3Ito
Don't cry because its over. Smile because it happened.
-
- Posts: 1315
- Joined: Tue Jul 05, 2005 11:23 pm
- Location: Right behind you Chief !
Re: Universal chassis
you poor guy, having people screaming stuff out the window at you as ya struggled up a hill somewhere near Barstow.......it was great to meet you....Hoofhearted wrote:I met him at SpeedWeek. Didn't get to talk to him long enough. I guess the Weslake is dead in the water. Shame. Was hoping to spur him to re-do it.
By weslake at 2012-08-17
...few understand what I'm trying to do , but they vastly outnumber those who understand why..
Re: Universal chassis
a hill you say, , there llooooong pulls out that way that just seam to go forever, ,,
First Australian to ride a motorcycle over 200mph at Bonneville,,,
-
- Posts: 62
- Joined: Wed Nov 25, 2009 5:55 pm
- Location: Riverside, SoCal
Re: Universal chassis
Dr. Goggles. It was a brief but enjoyable meeting. If I remember rightly we we pulling up El Cajon pass. Bones bring the Weslake back The salt needs more singles. Nevada seems to be nothing but uphill no matter what direction you travel.
Don't cry because its over. Smile because it happened.
Re: Universal chassis
Hoof
The weslake is not dead yet but is resting.
I picked up a TZ 250 A the other day. At the moment it's easier to tune a 2stroke than work out the weslake's problems.
See you next year with the vincent and maybe the 250.
cheers Bones
The weslake is not dead yet but is resting.
I picked up a TZ 250 A the other day. At the moment it's easier to tune a 2stroke than work out the weslake's problems.
See you next year with the vincent and maybe the 250.
cheers Bones