That's the one I measured and ran through the MOTA and lost 5 hp from standard.
I will measure my standard pipe and run it in MOTA and see what happens. My measuring is not so accurate.
The pipe came with the engine-- off a kart
Bones
Universal chassis
Moderator: DLRA
Re: Universal chassis
I had a pipe in mind for my bike, designed by a pipe program and it did the same thing, lost HP. Pete was good enough to measure up his "proper race pipes" and we put it in MOTA and got the best HP so that makes me think that the program is accurate. Thats what I based my pipes on with a few tweeks for the methanol.
Dave
Dave
Last Minute Racing
DLRA #928
2010 MPS/G 250 118 MPH
2011 Washed Out
2012 Washed Out
2013 MPS/G 250 131 MPH (RECORD)
2014 MPS/G 250 140 MPH (RECORD)
2015 MPS/F 250 DNF
2016 MPS/F 250 114 MPH (RECORD)
2017 MPS/F 250 DNF
Re: Universal chassis
I have the dimensions for a stock pipe and also for the factory A kit and port dimensions.
I will run them and see what happens.
Looks like the pipe will go forward between the radiators then turn 180* and exit in the middle of the fairing.
Bones
I will run them and see what happens.
Looks like the pipe will go forward between the radiators then turn 180* and exit in the middle of the fairing.
Bones