Universal chassis

See cars and bikes being built for the salt

Moderator: DLRA

User avatar
BONES
Posts: 354
Joined: Wed Mar 15, 2006 4:28 pm
Location: Killara Sydney

Re: Universal chassis

Post by BONES » Fri Nov 14, 2014 7:19 am

That's the one I measured and ran through the MOTA and lost 5 hp from standard.
I will measure my standard pipe and run it in MOTA and see what happens. My measuring is not so accurate.
The pipe came with the engine-- off a kart

Bones

User avatar
RGV
Posts: 661
Joined: Sun Feb 06, 2011 9:17 pm
Location: Adelaide Hills

Re: Universal chassis

Post by RGV » Fri Nov 14, 2014 8:31 am

I had a pipe in mind for my bike, designed by a pipe program and it did the same thing, lost HP. Pete was good enough to measure up his "proper race pipes" and we put it in MOTA and got the best HP so that makes me think that the program is accurate. Thats what I based my pipes on with a few tweeks for the methanol.

Dave

Last Minute Racing "its a 2-stroke ya twit - Its supposed to smoke"
DLRA #928
SATA #10

2010 MPS/G 250 118 MPH:)
2011 Washed Out:(
2012 Washed Out:(
2013 MPS/G 250 131 MPH (RECORD):)
2014 MPS/G 250 140 MPH (RECORD):)
2015 MPS/F 250 DNF:(

User avatar
BONES
Posts: 354
Joined: Wed Mar 15, 2006 4:28 pm
Location: Killara Sydney

Re: Universal chassis

Post by BONES » Sat Nov 15, 2014 12:33 pm

I have the dimensions for a stock pipe and also for the factory A kit and port dimensions.
I will run them and see what happens.
Looks like the pipe will go forward between the radiators then turn 180* and exit in the middle of the fairing.

Bones

Post Reply