Universal chassis

See cars and bikes being built for the salt

Moderator: DLRA

User avatar
BONES
Posts: 371
Joined: Wed Mar 15, 2006 4:28 pm
Location: Killara Sydney

Re: Universal chassis

Post by BONES »

That's the one I measured and ran through the MOTA and lost 5 hp from standard.
I will measure my standard pipe and run it in MOTA and see what happens. My measuring is not so accurate.
The pipe came with the engine-- off a kart

Bones
User avatar
RGV
Posts: 708
Joined: Sun Feb 06, 2011 9:17 pm
Location: Mid Murray Mallee

Re: Universal chassis

Post by RGV »

I had a pipe in mind for my bike, designed by a pipe program and it did the same thing, lost HP. Pete was good enough to measure up his "proper race pipes" and we put it in MOTA and got the best HP so that makes me think that the program is accurate. Thats what I based my pipes on with a few tweeks for the methanol.

Dave

Last Minute Racing
DLRA #928

2010 MPS/G 250 118 MPH
2011 Washed Out
2012 Washed Out
2013 MPS/G 250 131 MPH (RECORD)
2014 MPS/G 250 140 MPH (RECORD)
2015 MPS/F 250 DNF
2016 MPS/F 250 114 MPH (RECORD)
2017 MPS/F 250 DNF
User avatar
BONES
Posts: 371
Joined: Wed Mar 15, 2006 4:28 pm
Location: Killara Sydney

Re: Universal chassis

Post by BONES »

I have the dimensions for a stock pipe and also for the factory A kit and port dimensions.
I will run them and see what happens.
Looks like the pipe will go forward between the radiators then turn 180* and exit in the middle of the fairing.

Bones
Post Reply