Page 13 of 13

Re: Universal chassis

Posted: Fri Nov 14, 2014 7:19 am
by BONES
That's the one I measured and ran through the MOTA and lost 5 hp from standard.
I will measure my standard pipe and run it in MOTA and see what happens. My measuring is not so accurate.
The pipe came with the engine-- off a kart

Bones

Re: Universal chassis

Posted: Fri Nov 14, 2014 8:31 am
by RGV
I had a pipe in mind for my bike, designed by a pipe program and it did the same thing, lost HP. Pete was good enough to measure up his "proper race pipes" and we put it in MOTA and got the best HP so that makes me think that the program is accurate. Thats what I based my pipes on with a few tweeks for the methanol.

Dave

Re: Universal chassis

Posted: Sat Nov 15, 2014 12:33 pm
by BONES
I have the dimensions for a stock pipe and also for the factory A kit and port dimensions.
I will run them and see what happens.
Looks like the pipe will go forward between the radiators then turn 180* and exit in the middle of the fairing.

Bones