Universal chassis mk 3
Moderator: DLRA
Re: Universal chassis mk 3
Ronnie
You know the one--- it's just a little faster than 198.44 naked
Watching from affar?? not coming? I know you have stiff to pick up.
Bones
You know the one--- it's just a little faster than 198.44 naked
Watching from affar?? not coming? I know you have stiff to pick up.
Bones
Re: Universal chassis mk 3
yeah mate, anything with a 2 in front will do for naked, my moneys on Ev, however ill be rooting for anyone of "the crew", ,,
i wont be attending the 2014 event, too scared ,,
Steves gunna bring the stuff home, i'll give ya a call earlie in the new year,,
now, with a bit of "Heads Up", go hard mate,
i wont be attending the 2014 event, too scared ,,
Steves gunna bring the stuff home, i'll give ya a call earlie in the new year,,
now, with a bit of "Heads Up", go hard mate,
First Australian to ride a motorcycle over 200mph at Bonneville,,,
Re: Universal chassis mk 3
A little more progress.
I'll have the seat mounted today. The one in the picture has been cut to suite " A" class but this is what I will use for 'MPS'
I think I have triumphed over the electrickery. I powered up the system and most seemed to work- fuel pump, clutch switch ,starter. kill switch
The dash didn't work at first but when I put in the indicator fuse it also worked.
Now all I need is an engine to see if fuel and spark work. And build an engine
Ron
With you not there and EV not there ( bike still in the States) I might have 1/2 a chance at the first naked 200.
Bones
I'll have the seat mounted today. The one in the picture has been cut to suite " A" class but this is what I will use for 'MPS'
I think I have triumphed over the electrickery. I powered up the system and most seemed to work- fuel pump, clutch switch ,starter. kill switch
The dash didn't work at first but when I put in the indicator fuse it also worked.
Now all I need is an engine to see if fuel and spark work. And build an engine
Ron
With you not there and EV not there ( bike still in the States) I might have 1/2 a chance at the first naked 200.
Bones
Re: Universal chassis mk 3
Hahahaha ......lookin good bones .......I first think its a race to get finished and there for us both...I was hoping to have my engine ready while on leave but I cannot start until later this month when the parts I need can be ordered .......are you around this Saturday ? if so I may drop by
cheers
cheers
Vehicle......................A new creation.
Designed by................Troglodyte.
Engineered/ built by......Rustic.
Financed by.................Nickles & Dimes.
Rider......................... Tardus Vetus Inflatio
Designed by................Troglodyte.
Engineered/ built by......Rustic.
Financed by.................Nickles & Dimes.
Rider......................... Tardus Vetus Inflatio
Re: Universal chassis mk 3
just because Ev, Kim, Greg, Chris and myself have run up near there, dont guarentee nothing mate, everyones got 1/2 a chance, , now go git off the computer an back inya shed, ,, btw, lookin good, ,,
First Australian to ride a motorcycle over 200mph at Bonneville,,,
Re: Universal chassis mk 3
Hawk
I'll be around all weekend -- lots to do
Ring first
Bones
I'll be around all weekend -- lots to do
Ring first
Bones
Re: Universal chassis mk 3
hay Bones 'ole mate, hows things progressing ,, just interested on an update from the opposition, , as i have just being made redundent with a nice payout, so will be now bringing the green "Busa Basher" over to have a cuppla runs, ,,
First Australian to ride a motorcycle over 200mph at Bonneville,,,
Re: Universal chassis mk 3
Ronnie
good news.
Drop past and pick up that wheel
I will build an engine -only stock- this weekend and paint the frame.
If all goes well and I have a helper I will assemble it as well.
200 is looking closer all the time. LOOK OUT
Bones
good news.
Drop past and pick up that wheel
I will build an engine -only stock- this weekend and paint the frame.
If all goes well and I have a helper I will assemble it as well.
200 is looking closer all the time. LOOK OUT
Bones
Re: Universal chassis mk 3
"Good Stuff",,
Steves been up me about the wheel, so throw it in and wheel( ) negoiate over a ale or two, ,,
Steves been up me about the wheel, so throw it in and wheel( ) negoiate over a ale or two, ,,
First Australian to ride a motorcycle over 200mph at Bonneville,,,
Re: Universal chassis mk 3
I'll throw it in if I have room
Re: Universal chassis mk 3
The bike is on it's wheels and runs. It started started straight up.
The dash works-tacho , temp gauge, speedo. Verry surprising as I removed all the unwanted wiring.
The modified oil pan is now good for 5 1/2 L
All I need to do is learn how to tune it with a computer
The dash works-tacho , temp gauge, speedo. Verry surprising as I removed all the unwanted wiring.
The modified oil pan is now good for 5 1/2 L
All I need to do is learn how to tune it with a computer
Re: Universal chassis mk 3
Cricky sport great to hear the news ...my engine is still in pieces
Vehicle......................A new creation.
Designed by................Troglodyte.
Engineered/ built by......Rustic.
Financed by.................Nickles & Dimes.
Rider......................... Tardus Vetus Inflatio
Designed by................Troglodyte.
Engineered/ built by......Rustic.
Financed by.................Nickles & Dimes.
Rider......................... Tardus Vetus Inflatio
Re: Universal chassis mk 3
UPDATE
At speedweek this year the bike ran straight as.
It tram tracked through the messy parts on both tracks but when out of the mess it was straight and stable.
I was even confident enough to change lines going through the mess at 150 plus.
On the last run the bike was still accelerating into the redline. But no more gearing.
I am confident enough to take this one to Bonneville and have a go at the BUB records.
I should have half a chance with a good engine.
Bones
At speedweek this year the bike ran straight as.
It tram tracked through the messy parts on both tracks but when out of the mess it was straight and stable.
I was even confident enough to change lines going through the mess at 150 plus.
On the last run the bike was still accelerating into the redline. But no more gearing.
I am confident enough to take this one to Bonneville and have a go at the BUB records.
I should have half a chance with a good engine.
Bones
- Dreamliner 200
- Posts: 136
- Joined: Tue Feb 05, 2008 3:09 pm
- Location: Lake Macquarie
Re: Universal chassis mk 3
Go get 'em Bones!
Bike looks mean and nasty!
Good luck!
Bike looks mean and nasty!
Good luck!
DLRA Member 752
Livin' the dream!
Livin' the dream!
Re: Universal chassis mk 3
uummmm,, "half a chance with a good engine", ,, Heads Up,, ,,
First Australian to ride a motorcycle over 200mph at Bonneville,,,