VN V8 COMMODORE-current E/PRO record holder
Posted: Tue May 19, 2015 6:47 pm
VN V8 Commodore 100% class and rule compliant with current log book
Raced in 2015 claiming the E/Pro class record of 187.784mph at 2015 speedweek
Won "Best Presented Car" at 2016 Speedweek.
Engine is Holden 5Ltr V8 block and heads destroked to 259 ci with 400+HP..dyno sheets showing HP will be provided,
Rev limited safely at 8600rpm
Runs on 98ULP pump fuel
3 stage dry sump and fuel injected using Motec M84 with data logging
All engine machining by Rhemac Motors
JE pistons, Eagle H beam rods, Ferrea valves,Yella Terra roller rockers, Crow roller cam, ARP head studs/main studs and bolts through out,
Rhemac 4 bolt main caps and modified crank
Heads have been CNC port machined by Bullet Cylinder Heads
Top loader 4 speed
3 diffs With various rear tyre sizes
Adjustable front struts and Z bars
Kirkey aluminium seat, Velo Harness
Fire bottles re-certified in March, valid for 2 years
Car is ready to run with parachute supplied
There is more speed in this car, I run to the 5 mile mark without any handling concerns
Engine has lots more left in it
Full assistance given to purchaser, will provide all data and dyno sheets
For more details contact:
Tharon Hart 0413301450 or tharkel@internode.on.net
Cost more to build "believe me'
$39,500.00 negotiable. Make an offer!!
Raced in 2015 claiming the E/Pro class record of 187.784mph at 2015 speedweek
Won "Best Presented Car" at 2016 Speedweek.
Engine is Holden 5Ltr V8 block and heads destroked to 259 ci with 400+HP..dyno sheets showing HP will be provided,
Rev limited safely at 8600rpm
Runs on 98ULP pump fuel
3 stage dry sump and fuel injected using Motec M84 with data logging
All engine machining by Rhemac Motors
JE pistons, Eagle H beam rods, Ferrea valves,Yella Terra roller rockers, Crow roller cam, ARP head studs/main studs and bolts through out,
Rhemac 4 bolt main caps and modified crank
Heads have been CNC port machined by Bullet Cylinder Heads
Top loader 4 speed
3 diffs With various rear tyre sizes
Adjustable front struts and Z bars
Kirkey aluminium seat, Velo Harness
Fire bottles re-certified in March, valid for 2 years
Car is ready to run with parachute supplied
There is more speed in this car, I run to the 5 mile mark without any handling concerns
Engine has lots more left in it
Full assistance given to purchaser, will provide all data and dyno sheets
For more details contact:
Tharon Hart 0413301450 or tharkel@internode.on.net
Cost more to build "believe me'
$39,500.00 negotiable. Make an offer!!