tacho

hawkwind racing · Post by **hawkwind racing** » Tue Nov 08, 2005 9:07 pm

need a 12000 rpm tacho that will work with a schnitz pro 2 and /or dyna 4000 pro tried two motorcycle tacho's with no luck :cry:

Gary

Stayt`ie · Post by **Stayt`ie** » Tue Nov 08, 2005 9:33 pm

give Mick Withers a call at Rocket, (02)88251900.. talk with him, noone else...

Stayt`ie · Post by **Stayt`ie** » Tue Nov 08, 2005 9:49 pm

sorry Gary :oops:

, just read what i wrote, at Rocket talk only with Mick, as he is a walking encylopedia on these matters,,,

landracing · Post by **landracing** » Wed Dec 21, 2005 4:26 pm

Gary,

Tach will work with resister in line. Read out will be double the rpm. So if you are not using a digital type tach, 4K rpm will be 8k rpm.

There is also a selection for 2 pulses per crank rev, or 1 pulse per crank rev in the setup menu... Did you try that?

Jon

hawkwind racing · Post by **hawkwind racing** » Thu Dec 22, 2005 4:22 pm

Thanks Jon , I have tried all of that ,even went with an aftermarket jobbie , but this has same issues , not sure of the problem yet , but I think its all to do with buying the cheapest crap I could get

Gary