Anyone know where to buy threaded tube (3/4" OD, drilled and tapped 7/16" UNF internally) for welding into r/cage, for seatbelt eyes? I have the knowhow & gear to make them from scratch, but am becoming very conscious of time.
Denis
Seat belt mounts
Moderator: DLRA
-
- Posts: 80
- Joined: Fri Apr 10, 2009 7:56 pm
- Location: KINGAROY QLD AUSTRALIA
Re: Seat belt mounts
G'day Denis,
I've always used Holden wheel nuts welded into a tight fitting hole.
When building street rods we told the RTA engineers what we were using and they were happy enough provided they were properly welded in situ.
Cheers,
Rob
I've always used Holden wheel nuts welded into a tight fitting hole.
When building street rods we told the RTA engineers what we were using and they were happy enough provided they were properly welded in situ.
Cheers,
Rob
I owe, I owe, so off to work I go.