Seat belt mounts

Moderator: DLRA

Post Reply
vetteracer
Posts: 80
Joined: Fri Apr 10, 2009 7:56 pm
Location: KINGAROY QLD AUSTRALIA

Seat belt mounts

Post by vetteracer »

Anyone know where to buy threaded tube (3/4" OD, drilled and tapped 7/16" UNF internally) for welding into r/cage, for seatbelt eyes? I have the knowhow & gear to make them from scratch, but am becoming very conscious of time.
Denis
Rob
Posts: 1095
Joined: Wed Jul 06, 2005 5:30 pm
Location: Richmond, NSW. DLRA #888

Re: Seat belt mounts

Post by Rob »

G'day Denis,

I've always used Holden wheel nuts welded into a tight fitting hole.

When building street rods we told the RTA engineers what we were using and they were happy enough provided they were properly welded in situ.

Cheers,
Rob
I owe, I owe, so off to work I go.
Post Reply