The Helmet Eject/Removal Systems have been around for a while and I think it is a step forward in Motorsport Injury Prevention/Safety because it is so simple ... I'm not saying we should adopt it ..... but I am going to check it out for next year .... If any of use the system then I imagine we would need to let the Rescue Crew that we are wearing one ....
http://www.motorcycleaccessoriesaustral ... lator-bulb
I don't know if if this has happened in other places but I see it has being adopted in US Drag Racing ....
The NHRA now require Pro Stock Bike Riders to wear a Helmet Eject Device ...
http://www.nhra.com/Userfiles/File/Tech ... -30-14.pdf
This is the section
SECTION 15: PRO STOCK MOTORCYCLE, DRIVER: 10, HELMET (Page 6)
......
Eject Helmet Removal System (part number SDR 890-01-30) mandatory and must be installed per
manufacturer instructions.
A Stand 21 Lid Lifter head sock meeting SFI 3.3 may
be used in lieu of the Eject Helmet Removal System.
Pete
Eject Motorcycle Helmet Removal System ...
Moderator: DLRA
- AuotonomousRX
- Posts: 729
- Joined: Wed Jan 06, 2010 10:05 pm
- Location: Eyre Peninsula SA
Eject Motorcycle Helmet Removal System ...
Still trying to decide if I am a procrastinator
Pete
DLRA #866
Pete
DLRA #866
-
- Posts: 34
- Joined: Thu Feb 15, 2007 8:56 pm
- Location: Perth
Re: Eject Motorcycle Helmet Removal System ...
Have been using one of these for last 5 years, put the pump in a plastic bag with rider number on and give it to Rescue, Gairdner and Bonneville.
The Cups half full!!