Pulse jet Bike

Moderator: DLRA

User avatar
dplecko
Posts: 77
Joined: Sun Jan 29, 2012 9:12 pm
Contact:

Re: Pulse jet Bike

Post by dplecko »

does 500 lbs = roughly 2200 Newtons?

oxliver
Posts: 12
Joined: Tue Jun 10, 2014 8:35 am
Location: burnett heads

Re: Pulse jet Bike

Post by oxliver »

500 pounds of thrust equals 1000 horse power and jack zip pounds of torque
if your not breaking anything your not going hard enough

User avatar
gennyshovel
Posts: 841
Joined: Tue Mar 29, 2005 10:10 am
Location: Broken Hill

Re: Pulse jet Bike

Post by gennyshovel »

oxliver wrote:here's a test on a trailer of the bike
https://www.youtube.com/watch?v=_BEAY38 ... video_user
Looks like it would come in handy is the ute got a bet flattery too :D
Tiny DLRA# 484
Postiebike Racing , created & funded by TwoBob Engineering

oxliver
Posts: 12
Joined: Tue Jun 10, 2014 8:35 am
Location: burnett heads

Re: Pulse jet Bike

Post by oxliver »

gennyshovel if you look at the bottom of page three I put the tag on hear as well . and if you watch it a few times just before it gets shut off it was pushing the truck . hand brake and in gear . and was getting close to bob's foot
if your not breaking anything your not going hard enough

User avatar
gennyshovel
Posts: 841
Joined: Tue Mar 29, 2005 10:10 am
Location: Broken Hill

Re: Pulse jet Bike

Post by gennyshovel »

oxliver wrote:gennyshovel if you look at the bottom of page three I put the tag on hear as well . and if you watch it a few times just before it gets shut off it was pushing the truck . hand brake and in gear . and was getting close to bob's foot
Yep, I did notice that !
Tiny DLRA# 484
Postiebike Racing , created & funded by TwoBob Engineering

momec3
Posts: 780
Joined: Tue Mar 01, 2011 10:36 pm
Location: Cedar Grove Qld

Re: Pulse jet Bike

Post by momec3 »

So will we have something louder than a rotary?
Chris

oxliver
Posts: 12
Joined: Tue Jun 10, 2014 8:35 am
Location: burnett heads

Re: Pulse jet Bike

Post by oxliver »

hi chis
i'll be at the next qld timing meeting . so we can catch up if your there

regards jason
if your not breaking anything your not going hard enough

momec3
Posts: 780
Joined: Tue Mar 01, 2011 10:36 pm
Location: Cedar Grove Qld

Re: Pulse jet Bike

Post by momec3 »

Should have a meeting soon. Will be posted when it is. Look forward to seeing it.
Chris

oxliver
Posts: 12
Joined: Tue Jun 10, 2014 8:35 am
Location: burnett heads

Re: Pulse jet Bike

Post by oxliver »

hey chris
I'm up near bundy but not scared of driving for a good course
if your not breaking anything your not going hard enough

Post Reply