Page 4 of 4

Re: Pulse jet Bike

Posted: Sat Aug 16, 2014 9:41 pm
by dplecko
does 500 lbs = roughly 2200 Newtons?

Re: Pulse jet Bike

Posted: Sat Aug 16, 2014 10:04 pm
by oxliver
500 pounds of thrust equals 1000 horse power and jack zip pounds of torque

Re: Pulse jet Bike

Posted: Sun Aug 17, 2014 9:11 am
by gennyshovel
oxliver wrote:here's a test on a trailer of the bike
https://www.youtube.com/watch?v=_BEAY38 ... video_user
Looks like it would come in handy is the ute got a bet flattery too :D

Re: Pulse jet Bike

Posted: Sun Aug 17, 2014 6:58 pm
by oxliver
gennyshovel if you look at the bottom of page three I put the tag on hear as well . and if you watch it a few times just before it gets shut off it was pushing the truck . hand brake and in gear . and was getting close to bob's foot

Re: Pulse jet Bike

Posted: Wed Aug 20, 2014 11:31 pm
by gennyshovel
oxliver wrote:gennyshovel if you look at the bottom of page three I put the tag on hear as well . and if you watch it a few times just before it gets shut off it was pushing the truck . hand brake and in gear . and was getting close to bob's foot
Yep, I did notice that !

Re: Pulse jet Bike

Posted: Thu Aug 21, 2014 2:40 pm
by momec3
So will we have something louder than a rotary?

Re: Pulse jet Bike

Posted: Wed Aug 27, 2014 7:34 am
by oxliver
hi chis
i'll be at the next qld timing meeting . so we can catch up if your there

regards jason

Re: Pulse jet Bike

Posted: Sat Aug 30, 2014 8:57 pm
by momec3
Should have a meeting soon. Will be posted when it is. Look forward to seeing it.

Re: Pulse jet Bike

Posted: Sat Aug 30, 2014 9:38 pm
by oxliver
hey chris
I'm up near bundy but not scared of driving for a good course