Page 4 of 4
Re: Pulse jet Bike
Posted: Sat Aug 16, 2014 9:41 pm
by dplecko
does 500 lbs = roughly 2200 Newtons?
Re: Pulse jet Bike
Posted: Sat Aug 16, 2014 10:04 pm
by oxliver
500 pounds of thrust equals 1000 horse power and jack zip pounds of torque
Re: Pulse jet Bike
Posted: Sun Aug 17, 2014 9:11 am
by gennyshovel
Looks like it would come in handy is the ute got a bet flattery too
Re: Pulse jet Bike
Posted: Sun Aug 17, 2014 6:58 pm
by oxliver
gennyshovel if you look at the bottom of page three I put the tag on hear as well . and if you watch it a few times just before it gets shut off it was pushing the truck . hand brake and in gear . and was getting close to bob's foot
Re: Pulse jet Bike
Posted: Wed Aug 20, 2014 11:31 pm
by gennyshovel
oxliver wrote:gennyshovel if you look at the bottom of page three I put the tag on hear as well . and if you watch it a few times just before it gets shut off it was pushing the truck . hand brake and in gear . and was getting close to bob's foot
Yep, I did notice that !
Re: Pulse jet Bike
Posted: Thu Aug 21, 2014 2:40 pm
by momec3
So will we have something louder than a rotary?
Re: Pulse jet Bike
Posted: Wed Aug 27, 2014 7:34 am
by oxliver
hi chis
i'll be at the next qld timing meeting . so we can catch up if your there
regards jason
Re: Pulse jet Bike
Posted: Sat Aug 30, 2014 8:57 pm
by momec3
Should have a meeting soon. Will be posted when it is. Look forward to seeing it.
Re: Pulse jet Bike
Posted: Sat Aug 30, 2014 9:38 pm
by oxliver
hey chris
I'm up near bundy but not scared of driving for a good course