I have been told that Magnas have massive flow fuel injectors. I put a query on the TOYMODS forum, and got this reply.
Re: Magna injectors Tue, 03 June 2003 20:32
I had a look at the injector specs and the 6G74 (3.5L V6) injectors were about 600cc/min. But my surprise was VR4 injectors! They are 900cc/min! Get some of them, or EVO ones they are about the same as VR4. But they still wont be a bolt in fit.
Regards,
NOS4AG!
900cc/min is massive. About the same size as the supercars run.
Fuel injectors for EFI engines
Moderator: DLRA
-
- Posts: 60
- Joined: Wed Apr 23, 2003 11:50 pm
- Location: Melbourne
- Contact:
Fuel injectors for EFI engines
John Broughan
Empty Pockets Racing
200 MPH club life member
Empty Pockets Racing
200 MPH club life member
Injector info
I asked by FI guru, Choco and this was his response.
They are pretty big injectors. I suspect they are peak and hold (P&H) injectors. At 900 cc/min (divide that by 10.5 for lbs/hr, which is about 85lbs/hr) these injectors will look after a 500HP V8. Refer to my articles in ASR for the formula and ratings.
_________________
<><><><><><><><><><><><><><><>
Frank Choco Munday, Technical Author
Hot Rod Handbooks
Phone: 0412 883 235 or (02) 6255 9810
Carburettors SUCK!
They are pretty big injectors. I suspect they are peak and hold (P&H) injectors. At 900 cc/min (divide that by 10.5 for lbs/hr, which is about 85lbs/hr) these injectors will look after a 500HP V8. Refer to my articles in ASR for the formula and ratings.
_________________
<><><><><><><><><><><><><><><>
Frank Choco Munday, Technical Author
Hot Rod Handbooks
Phone: 0412 883 235 or (02) 6255 9810
Carburettors SUCK!
Keep the shiney side up........
DLRA WebMaster / Editor
DLRA WebMaster / Editor
-
- Posts: 60
- Joined: Wed Apr 23, 2003 11:50 pm
- Location: Melbourne
- Contact: