FOR SALE
APS-F 100 $3000
Current record holder--- 99.4 mph Has been 105 on the GPS track
Current number is 1035
YZ 80 engine
Chassis will accept TZ 350 or anything in between.
19" rear wheel with V rated avon
17" front with slick.
This is a propper 'A' bike. Everything has been custom made or modified to suite.
The bike is very stable. Alex has limited riding experience and has had no problems riding this bike
The bike has plenty of potential in smaller classes.
The bike will need a going over as it hasn't been used for 2 years. It is running.
The bike is in Sydney. Call- 02 9498-4124 or 0413-833891
cheers Bones
APS-G 100
Re: APS-G 100
Assuming zero tailwind, how much RWHP would be required to achieve 128mph in that chassis, or to rephrase the question do you have any Cd or CdA estimates?
Re: APS-G 100
for an approximate, you could "calculate" from known figures
First Australian to ride a motorcycle over 200mph at Bonneville,,,
Re: APS-G 100
dpleco
My RS125 went 125 with me on it in road race trim with 40hp claimed --- they are small Japanese hp.
I had started to put the 125 into this chassis but Alex was showing very little interest so decided to sell it.
I recon this bike should go 135+ with the 125.
I think I got 19hp out of the 80
You NEED this bike
cheers Bones
My RS125 went 125 with me on it in road race trim with 40hp claimed --- they are small Japanese hp.
I had started to put the 125 into this chassis but Alex was showing very little interest so decided to sell it.
I recon this bike should go 135+ with the 125.
I think I got 19hp out of the 80
You NEED this bike
cheers Bones
Re: APS-G 100
Got some photos of (cradle) frame? dimensions of said frame?
pm'd
pm'd
If its got b**bs or wheels its bound to be trouble!
- Greg Watters
- Posts: 760
- Joined: Mon Sep 27, 2004 8:57 pm
Re: APS-G 100
How much detail do you want
http://www.dlra.org.au/forum/viewtopic.php?f=18&t=1372
http://www.dlra.org.au/forum/viewtopic.php?f=18&t=1372
Re: APS-G 100
Hey boyracer
If you look through the build diary you can see the bike. There is a few bikes in the diary.
The weslake is another frame. Look for any pictures with a yz80 or an rs125.
When I rode the bike with the 125 I didn't change the seating position and it is short for me. I am 6'1 and my son is 5'8 and the bike is set up for him.
If the pipe was removed and the seat moved back and up you might fit.
Check the seat to footpeg relationship. How flexible are you?
At the tallest part of the frame it is 390mm between the top and bottom tubes.
The top tubes are 100mm apart and the bottom tubes are 250 apart.
cheers Bones
If you look through the build diary you can see the bike. There is a few bikes in the diary.
The weslake is another frame. Look for any pictures with a yz80 or an rs125.
When I rode the bike with the 125 I didn't change the seating position and it is short for me. I am 6'1 and my son is 5'8 and the bike is set up for him.
If the pipe was removed and the seat moved back and up you might fit.
Check the seat to footpeg relationship. How flexible are you?
At the tallest part of the frame it is 390mm between the top and bottom tubes.
The top tubes are 100mm apart and the bottom tubes are 250 apart.
cheers Bones