A very interesting article.
http://twostrokemotocross.com/2009/06/t ... rike-back/
Tiny
Two strokes set to return and better four stroke torque / HP
Moderator: DLRA
- gennyshovel
- Posts: 866
- Joined: Tue Mar 29, 2005 10:10 am
- Location: Broken Hill
Two strokes set to return and better four stroke torque / HP
Tiny DLRA# 484
Postiebike Racing , created & funded by TwoBob Engineering
Postiebike Racing , created & funded by TwoBob Engineering
"Holy Smokes" ,,,
One just has to look at what the BuddFab liner is doing, also Brett DeStoop`s performance,,,, interesting indeed
On the subject off DeStoop`s bike,, dose anyone know the fastest speed recorded by a "sit on" two smoke
One just has to look at what the BuddFab liner is doing, also Brett DeStoop`s performance,,,, interesting indeed
On the subject off DeStoop`s bike,, dose anyone know the fastest speed recorded by a "sit on" two smoke
First Australian to ride a motorcycle over 200mph at Bonneville,,,
-
- Posts: 475
- Joined: Mon Nov 20, 2006 12:18 pm
- Location: Melbourne
- Contact:
I looked at the Orbital stuff for my tweaks as it is possible to retrofit the system to existing engines http://www.envirofit.org/ however I found the design part to make it work for a particular engine was... errr... tricky. I spoke to Oribital and they will work on a design however it ain't cheap (unless you were planning to sell a few thousand engines).
I hunted around for pre-designed engines I could hack into but all I could find in the bigger sizes were Mercury outboard engines...
so it's really good news that there are going to be some more suitable direct injection engines coming through
I hunted around for pre-designed engines I could hack into but all I could find in the bigger sizes were Mercury outboard engines...
so it's really good news that there are going to be some more suitable direct injection engines coming through
Paul
---
DLRA #647
89.664 mph (aiming for 100mph+)
www.vespalabs.org
---
DLRA #647
89.664 mph (aiming for 100mph+)
www.vespalabs.org
Sorry mate, forgot about the Vesper, and that it is a two stroke, impressive performance`s ,, however i feel it is a "impressive performance" that you ride one off those things at those speeds , and your planning on going even faster
We had a vesper at a place where i worked once, bloody thing was always trying to throw me off , had a lot of fun on that bike , was good for wheelies
I gave hotting up 500 and 750 Kawasakies in the late seventies, but have always thought that i didnt go far enough with two stroke performance technoligy,,, marine motors would be the first i would study if i was too get back into them,,, especially this direct injection thing,,, geeze its tempting
We had a vesper at a place where i worked once, bloody thing was always trying to throw me off , had a lot of fun on that bike , was good for wheelies
I gave hotting up 500 and 750 Kawasakies in the late seventies, but have always thought that i didnt go far enough with two stroke performance technoligy,,, marine motors would be the first i would study if i was too get back into them,,, especially this direct injection thing,,, geeze its tempting
First Australian to ride a motorcycle over 200mph at Bonneville,,,
- Last Minute Racing
- Posts: 118
- Joined: Sun Mar 04, 2007 1:20 pm
- Location: Adelaide Hills DLRA#928
mmmm 2 strokes
Got some parts so now i can start putting it back together.
How long to go now?
Thanx
Dave
How long to go now?
Thanx
Dave