2.5:1 gears to suit borg warner diff

List Land Speed and Salt Lake items you want to buy here

Moderators: DLRA, WANTED

Post Reply
Jason P
Posts: 14
Joined: Wed Mar 12, 2008 6:10 am
Location: Gold Coast QLD

2.5:1 gears to suit borg warner diff

Post by Jason P »

Looking for a set of 2.5 gears to suit a borg warner diff out of a zh fairlane, have tried a multitude of places to no avail, anyone with a set that they are willing to part with or any info on were to get a set would be greatly appreciated
Thanks Jason
the randy dero
Posts: 171
Joined: Wed Jun 06, 2007 9:02 pm
Location: Blacktown, NSW.
Contact:

Post by the randy dero »

The axle assemblies were made by Borg Warner. Have you tried them? I don't know what ratios are/were available but that's where I'd be starting.
Stephen
David Leikvold
Posts: 981
Joined: Mon Apr 16, 2007 11:57 pm
Location: Brisbane

any good?

Post by David Leikvold »

Blackout Steve has a used 2.47 set for a 9" for sale here if you wanted to change the diff.
Good, Fast, Cheap, pick any two!
Rob
Posts: 1095
Joined: Wed Jul 06, 2005 5:30 pm
Location: Richmond, NSW. DLRA #888

Post by Rob »

I'm pretty sure these centers were the same for Falcon Fairlane, Cortina and Centura??.. possibly others too??

Rob
I owe, I owe, so off to work I go.
the randy dero
Posts: 171
Joined: Wed Jun 06, 2007 9:02 pm
Location: Blacktown, NSW.
Contact:

Post by the randy dero »

Checked under a Commodore lately? The live rear commodes appear to have the same axle assembly. VN onwards all disc rear brakes. I have one here (3.08) limited slip with saddles to fit ute/van/tonner.
Stephen
User avatar
jrbcastle
Posts: 82
Joined: Wed Feb 08, 2006 4:29 am

WB statesman

Post by jrbcastle »

WB statesmans had 2.6 rear end same borg warner gear sets too
Jason P
Posts: 14
Joined: Wed Mar 12, 2008 6:10 am
Location: Gold Coast QLD

Post by Jason P »

Many thanks for all the info gents, I have a set of 2.53 borg warner gears on the way from a gentleman in victoria. Thanks again.
The Panel Van Man
Posts: 8
Joined: Mon May 31, 2010 9:48 pm
Location: melbourne
Contact:

Post by The Panel Van Man »

Must be common in Vic. I have a set as well. Came out in XE'S with a 200Ci engine. Poverty pack cars. I am having a 28 spline spool moded to fit the tall carrier then you can use E series axles. If you need one let me know. Regards TPVM.
wfpv
alphabet
Posts: 37
Joined: Fri Feb 11, 2005 12:12 am

Re: 2.5:1 gears to suit borg warner diff

Post by alphabet »

:o They're so common here in vic that it took me 12 yrs to locate the ones that Jason now has.
Post Reply