Toyota Soarer/Lexus SC400 E/Pro
Moderator: DLRA
Re: Toyota Soarer/Lexus SC400
There are clearance issues beneath the bonnet, I haven't measured yet but everything in these is close. As an example, to fit extractors you have to pull the engine.
More like bird crap and dust Goggles!
More like bird crap and dust Goggles!
I owe, I owe, so off to work I go.
- AuotonomousRX
- Posts: 729
- Joined: Wed Jan 06, 2010 10:05 pm
- Location: Eyre Peninsula SA
Re: Toyota Soarer/Lexus SC400
Hey Rob
Really happy to see that you're back on the Job ... that's a pity about that 1uz Site ... a similar thing happened with an RGV site ...
Pete
Really happy to see that you're back on the Job ... that's a pity about that 1uz Site ... a similar thing happened with an RGV site ...
Pete
Still trying to decide if I am a procrastinator
Pete
DLRA #866
Pete
DLRA #866
Re: Toyota Soarer/Lexus SC400
Thanks Pete,
Just don't expect stellar progress. When it's done, it's done.
Cheers,
Rob
Just don't expect stellar progress. When it's done, it's done.
Cheers,
Rob
I owe, I owe, so off to work I go.
Re: Toyota Soarer/Lexus SC400 E/Pro
Found what I was after, no dimensions as yet but may have a solution coming with any luck.
I owe, I owe, so off to work I go.
Re: Toyota Soarer/Lexus SC400 E/Pro
Rob,
For dimensions its easy, assembly the dummy block with heads. Drop it to your local CNC mill shop and ask them to "clock it up" and give you the pics.
That way it will be accurate. Won't take em too long, and cost will be worthwhile.
For dimensions its easy, assembly the dummy block with heads. Drop it to your local CNC mill shop and ask them to "clock it up" and give you the pics.
That way it will be accurate. Won't take em too long, and cost will be worthwhile.
Chris
Re: Toyota Soarer/Lexus SC400 E/Pro
Thanks Chris,
This plate goes between the 1UZ lower inlet manifold and RB26DETT throttle bodies, no block or heads required.
I have a friend in the US with software, I should have the CAD file back soon he says. He is also going to price getting it supplied and cut there given we'll be seeing him in August.
Cheers,
Rob
This plate goes between the 1UZ lower inlet manifold and RB26DETT throttle bodies, no block or heads required.
I have a friend in the US with software, I should have the CAD file back soon he says. He is also going to price getting it supplied and cut there given we'll be seeing him in August.
Cheers,
Rob
I owe, I owe, so off to work I go.
Re: Toyota Soarer/Lexus SC400 E/Pro
Cool, bit like pulling teeth getting the right info on IUZ's
Chris
Re: Toyota Soarer/Lexus SC400 E/Pro
v-eight.com was excellent, I am greatly saddened that it has been let go.
Lextreme is fair at best with lots of the info being unreliable.
Lextreme is fair at best with lots of the info being unreliable.
I owe, I owe, so off to work I go.
Re: Toyota Soarer/Lexus SC400 E/Pro
Geeze Rob, your six months too late,, (Redundency),, i done eighteen years CAD/CAM, Programming, processing any shape was/is a breeze, ,,
First Australian to ride a motorcycle over 200mph at Bonneville,,,
Re: Toyota Soarer/Lexus SC400 E/Pro
A day late and a dollar short.. story of my life Stayt'ie Thanks all the same.
I do have a mate here with a CAD/CAM machine shop at Lidcombe but didn't know his email address, such is the digital age that sending to the US was easier than chasing him down.
I do have a mate here with a CAD/CAM machine shop at Lidcombe but didn't know his email address, such is the digital age that sending to the US was easier than chasing him down.
I owe, I owe, so off to work I go.
Re: Toyota Soarer/Lexus SC400 E/Pro
Hey Ronnie
were you able to pirate any cad programs--- might have a job which will pay
Sorry for the hijack Rob
Bones
were you able to pirate any cad programs--- might have a job which will pay
Sorry for the hijack Rob
Bones
Re: Toyota Soarer/Lexus SC400 E/Pro
All good Bones, have at it.. that's not a question I would ask nor answer in public though
I owe, I owe, so off to work I go.
Re: Toyota Soarer/Lexus SC400 E/Pro
quiet happy to answer here, "no" ,, 'bout six,seven years ago we changed programes and i had a complete set of the old original discs and the dongle in my office draw for years, i was often tempted to take them home but ended up throwing them out one day when we had a big cleanup at work,,
end of hi-jack,
end of hi-jack,
First Australian to ride a motorcycle over 200mph at Bonneville,,,
- ROSS BROWN
- Posts: 477
- Joined: Thu Feb 18, 2010 6:43 pm
- Location: COORPAROO BRISBANE
Re: Toyota Soarer/Lexus SC400 E/Pro
Rob
The 3 dimension picture you have pictured is questionable to the program !
In plan veiw ...it looks as the intake runner holes are round at the top and square at the bottom..
Is this correct ? If so , this part is to be made on a 4 axis CNC wire cutter.
Just so happens... I have the "Teachers version" of mastercam 9. sort of a loop hole thing
If you have the plan veiw of that drawing I can put measurement to it. accurate to 3 zeros..
Or I can send you the programme and you can learn it yourself..
Just saying..
Ross.
The 3 dimension picture you have pictured is questionable to the program !
In plan veiw ...it looks as the intake runner holes are round at the top and square at the bottom..
Is this correct ? If so , this part is to be made on a 4 axis CNC wire cutter.
Just so happens... I have the "Teachers version" of mastercam 9. sort of a loop hole thing
If you have the plan veiw of that drawing I can put measurement to it. accurate to 3 zeros..
Or I can send you the programme and you can learn it yourself..
Just saying..
Ross.
IT IS ALL A RACE AGAINST TIME.
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925
TIME WAITS FOR NO ONE.
HOW FAST CAN YOU GO ?
S/UF 925