Black bullet /bfl
Moderator: DLRA
Black bullet /bfl
After several design mods I have started on the molds for my belly tanker. The car is going to be a slightly stretched p38 tank size going from 12'6" to 12'9 1/4" the extra 3 1/4" is to allow for a self designed all wheel drive system. At this stage I'm waiting for the ribs and spacers to set and harden before i skin and urethane it.
Last edited by S-two on Mon Dec 10, 2012 4:50 pm, edited 1 time in total.
There is no such thing as too fast.
Re: Black bullet /bfl finaly started
Goodluck on the build S-two , what powerplant . cheers Mick
Re: Black bullet /bfl finaly started
It was ment to be a zzr1100 motorcycle set up but i have been given a 2012 suzuki 500cc engine so i will run with that till i can afford the busa engine.
Rob
Rob
There is no such thing as too fast.
Re: Black bullet /bfl
The marine ply ribs are dry and everything is hard. The first couple of strips of 2mm balsa have been fitted to what will be the top of the bottom half mold. I will post pics when i can work out how.
There is no such thing as too fast.
Re: Black bullet /bfl
Sounds good S-two (Ducati?).
Do you have a photobucket account or similar for your photos?
Cheers
jon
Do you have a photobucket account or similar for your photos?
Cheers
jon
DLRA#1115
Underhouse Engineering
Underhouse Engineering
Re: Black bullet /bfl
No photobucket yet but will have soon.
The outer skin of the mold has been sanded smooth and ready for the urithane now just waiting for slightly cooler days .
The outer skin of the mold has been sanded smooth and ready for the urithane now just waiting for slightly cooler days .
There is no such thing as too fast.
- AuotonomousRX
- Posts: 729
- Joined: Wed Jan 06, 2010 10:05 pm
- Location: Eyre Peninsula SA
Re: Black bullet /bfl
Great to hear another interesting vehicle being built, good stuff
Pete
Pete
Still trying to decide if I am a procrastinator
Pete
DLRA #866
Pete
DLRA #866